BowlingFans.com, The site for the fans, by the fans....


BallBeat - Get the scoop on Pro drillings


      BallBeat gives fans access to exactly which bowling balls the pros were throwing and how the equipment was drilled and prepared for the telecasts.
      Ball manufacturer representatives and pro bowlers: click here.

-Silicon Valley Open:

  • Ebonite International - Del Ballard wrote:
          Chris Hayden was using a TPS III drilled with a 4 inch pin, hole near the axis. Jason couch used an Apex all week but used the Vortex II on the show because they hooked more. It was drilled with a 4 1/2 inch pin with small hole on axis.

  • Storm - Steve Kloempken wrote:
          Dennis Horan was actually using the SAME ball he won with in Akron last year! It is a Thunder Flash Pro with a pin 4" from the PAP and mass bias in the ball track position, no extra hole. We freshened up the surface from time to time with a little u-clean u-score, a urethane ball cleaner.



Recent BowlingFans.com BallBeat Updates:
-PBA Miller High Life Open
    Pat Healey Jr
-PWBA Columbia 300 Open
    Wendy Macpherson
-PBA Greater Nashville Open
    Tim Criss




A NOTE TO BALL MANUFACTURER REPRESENTATIVES AND PRO BOWLERS:
      We welcome Reps (and pros) associated with ANY ball company that had its equipment used on the telecasts to submit a list of the equipment and drilling information to
us. There is no cost to be included and again any company that supplies information on their equipment used during the shows will have their information published.












About BowlingFans.com | Contact Us | Advertise With Us | Privacy Policy
Use of this site signifies your agreement to the Conditions of Use.

Copyright © 1998 - 2008 - BowlingFans.com or its affiliates.
BowlingFans.com, BowlingFans, The Right Approach, Kegler's Connection, Tour411, BallBeat, BowlingCommunity.com, BowlSearch.com, and Bowling News You Can Use are trademarks of BowlingFans.com. All other trademarks and tradenames are property of their respective owners.