BowlingFans.com: BallBeat: Indianapolis Open

BowlingFans.com, The site for the fans, by the fans....

BallBeat gives fans access to exactly which bowling balls the pros were throwing and how the equipment was drilled and prepared for the telecasts.
Ball manufacturer representatives and pro bowlers: click here.

Indianapolis Open:

Ebonite International - Del Ballard wrote:
Doug Kent was using a Vortex 2 with a 6 inch pin above middle finger with a 6 inch hole on the midplane. Doug threw a Maxim down the middle for the first 30 minutes to carry the oil down.
Storm - Hank Boomershine wrote:
Jeff Zaffino was throwing an eraser with a pin 4 3/4 from his axis and the cg was 3 3/4 from his axis. It was brought to a high gloss with Storm Diamond Gloss polish. He started out slow for the first few frames, then moved a little more right and was dialed in. The only problem was that doug got out to an early lead. Maybe next time

Recent BowlingFans.com BallBeat Updates:

PBA Miller High Life Open
Pat Healey Jr

PWBA Columbia 300 Open
Wendy Macpherson

PBA Greater Nashville Open
Tim Criss

A NOTE TO BALL MANUFACTURER REPRESENTATIVES AND PRO BOWLERS:
We welcome Reps (and pros) associated with ANY ball company that had its equipment used on the telecasts to submit a list of the equipment and drilling information to us. There is no cost to be included and again any company that supplies information on their equipment used during the shows will have their information published.

About BowlingFans.com | Contact Us | Advertise With Us | Privacy Policy
Use of this site signifies your agreement to the Conditions of Use.

Copyright © 1998 - 2010 - BowlingFans.com. All rights reserved. | Copyright Policy | Material Connection Disclosure
BowlingFans.com, BowlingFans, The Right Approach, Kegler's Connection, Tour411, BallBeat, BowlingCommunity.com, BowlSearch.com, and Bowling News You Can Use are trademarks of BowlingFans.com. All other trademarks and tradenames are property of their respective owners.